Rode NTG3 (Silver)
Ilman alv:tä:
544,63 €
659,00 €
Loppu varastosta. Ota meihin yhteyttä ehtoihin liittyen.
Muut mallit
Ask our experts!
Kuvaus
Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the satin nickel Rode NTG3 moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction.
The NTG3's high sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG3 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. The solid brass housing is both durable and lightweight, and its anti-glare finish prevents reflections in the shot.
Designed to Withstand Adverse Environmental Conditions
When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG3's RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.
Broadcast-Quality Sound
The NTG3 was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
The combination of the NTG3's 25.5 cm long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
Phantom Powered
Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG3 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
Ideal for Boompole Mounting
The NTG3 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3 in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.
Windscreen Minimizes Wind Noise
The NTG3 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).
Toiminnot
- For Indie Films, TV & Documentaries
- Moisture-Resistant for Humid Conditions
- Phantom Powered
- Simple Operation with No Controls
- Enhanced Immunity to RF Interference
- Low-Noise Circuitry
- High Sensitivity Requires Less Gain
- Slight Presence Boost & Bass Attenuation
- Windscreen Reduces Wind Noise
- Lightweight Housing
Mitä laatikossa on?
- RODE NTG3 Moisture-Resistant Shotgun Microphone (Satin Nickel)
- RODE RM5 Stand Mount for the NT5 Microphone
- Windscreen
- Aluminum Storage Cylinder
- Padded Zip Pouch
Eritelmä
| Microphone Type | Condenser |
| Mono/Stereo 2 | Mono |
| Polar Pattern | Supercardioid |
| Diaphragm Size | 12.70 mm |
| Taajuusvaste | 40 - 20 000 Hz |
| Max SPL | 130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Impedanssi | 25 ohm |
| Äänenpaineen | -30 dBV/Pa at 1 kHz |
| Connector | XLR |
| Microphone Features | Phantom |
| Ulkomitat | ø: 1.9 x L: 25.5 cm |
| Paino | 0.1 kg |
| Väri | Silver |